RMG TME400-VMF User Manual

4 Operation
MANUAL TME400-VCF · EN08 · July, 01
st
2021
68
4.3.3.4.
Temperature
Coordi-
nate
Name
Description
D01
Temperature
Current temperature
D02
Temperature mode
Temperature measurement transmitter (source of the temperature
measurement)
0
Specification (default, fixed value)
1
Pt1000
D03
Temperature default
Default value of the temperature
D04
Temperature Minimum
This value represents the lowest temperature value of the tempera-
ture sensor at which the functionality of the TME400 is still guaran-
teed. An error is displayed if the temperature is below this limit.
D05
Temperature Maximum
This value represents the highest temperature value of the tempera-
ture sensor at which the functionality of the TME400 is still guaran-
teed. An error is displayed if the temperature is above this limit.
D06
Temperature modera-
tion
The temperature value is moderated by means of averaging.
A value of 0 corresponds to no moderation.
A value of 0.99 causes heavy moderation.
D11
PT1000 resistance
Corrected resistance value of the Pt1000
D12
PT1000 resistance un-
corr.
Uncorrected resistance value of the Pt1000
D30
Temperature (uncor-
rected)
Display of the uncorrected temperature measurement
D35
Temperature setpoint 1
Set point 1 (lower value) for temperature adjustment
D36
Temperature setpoint 2
Set point 2 (upper value) for temperature adjustment
D37
Temp. actual value 1
Measured value at temperature set point 1
D38
Temp. actual value 2
Measured value at temperature set point 2
D41
Write temperature corr.
Correction values with are adopted with "Yes" are calculated inter-
nally.

RMG TME400-VMF Specifications

General

Brand	RMG
Model	TME400-VMF
Category	Measuring Instruments
Language	English