25
Two position points has to be placed on the stage in a way that all xtures used in the follow spot operation
have to change both pan and tilt values when go from the 1st point to the 2nd point.
In the following example the xture 3 does not change its pan value (only tilt value) when head moves from the
1st point to the 2nd point, the 2nd point is not select correctly, better position for the 2nd point is on the picture
above.
Touch the Next button.
7. The following massage will appear on the screen:
Use the jog-wheels or handle faders or faders on the FollowSpot Controller screen (depending on xture
mapping) to set desired zoom and focus in the point 2.
To Next Page
Loading...
