Robopac Masterplat PLUS TP3 FRD User Manual

75
INFORMATION ON ADJUSTMENTS
ENG
5.7. ADJUSTING THE TABLE GUIDE WHEELS
1. Remove the cover (A).
2. Loosen the fastening nuts (B).
3. Loosen the screw (E).
4. Tighten the screw (D) so that the wheel (C) is pressed against the rotary plate by approximately 4 mm.
5. Tighten the screw (E).
6. Tighten the nuts (B).
7. Refit the guard (A).
Masterplat PLUS TP3

Robopac Masterplat PLUS TP3 FRD Specifications

General

Brand	Robopac
Model	Masterplat PLUS TP3 FRD
Category	Stretch Wrapping Systems
Language	English