Robopac Masterplat PLUS TP3 FRD User Manual

89
INFORMATION ABOUT THE USE
ENG
P
Page for entering the password to change the user; Turn
to select the digit and press to confirm.
Select “C” to delete the password.
Select the “Checkmark” to confirm the password.
P
Enter the password (default 9999) to lock the panel.
When the panel is locked, the edge of the screen is
yellow.
P
Enter the password to unlock the panel.
P
To change the panel lock password, enter a new
password and select the “checkmark”. Enter the chosen
password again and confirm to update its value.
P
CELL = Load cell reading instant value.
OFFSET = Offset value (with film tensioning = 0).
Press and keep pressed (for about 3 seconds) to set the
parameter (only after logging in).

Robopac Masterplat PLUS TP3 FRD Specifications

General

Brand	Robopac
Model	Masterplat PLUS TP3 FRD
Category	Stretch Wrapping Systems
Language	English