Robox RBX01 - Minimum Hardware Requirements

2121
www.cel-robox.com
2.0 Overview
2.2.5 3D Printing Head
• Print Technology: Fused Filament Fabrication (FFF)
• Build Size (LxWxH): 210 x 150 x 100mm (8.3 x 5.9 x 3.9 in)
• Layer Resolutions: Super (20 microns / 0.0008 in)
High (100 microns / 0.0039 in)
Standard (200 microns / 0.0078 in)
Low (300 microns / 0.0118 in)
• Positioning Precision: XY: 7.5 microns (0.0003 in)
Z: 0.15625 microns (0.000006 in)
• Filament Diameter: 1.75mm (0.069 in)
• Nozzle Diameters: 0.3mm (0.012 in) and 0.8mm (0.031 in)
• Model Materials: PLA, ABS, Nylon, PC, PET, PC-ABS + others
• Support Materials: PVA, HIPS, PLA
2.2.6 Soware
• Soware Bundle: Robox® AutoMaker™
• File Types: .stl, .obj, .robox
• Soware Compatibility: Windows (7, 8), Mac OS x (10.6 x64/10.7+),
Ubuntu Linux (12.04+)
2.3 Minimum Hardware Requirements
Processor Minimum:
Recommended:
Dual-core 2.0Ghz
Quad-core 3.0Ghz
System RAM Minimum:
Recommended:
2GB
4GB or greater
Hard Disk Installation:
Minimum:
Recommended:
256MB
2GB
4GB or greater
Graphics Card Minimum:
Recommended:
1024x768 or greater
128MB or greater memory
1680x1050 or greater
256MB or greater memory
or integrated Intel HD graphics
OpenGL v2.0 Support