Robox RBX01 - Advanced Speed Settings

7272
www.cel-robox.com
5.0 AutoMaker Soware
5.5.9 Advanced Settings - Speed
This settings page allows you to adjust all the parameters which aect the
speed of printing. There are individual settings for various parts of the print
including perimeters, bridges, and infill. By tuning these values, users can
control the appearance of printed objects and optimise speed vs. quality.
1 Perimeter Print Speed 6 Top Solid Infill Speed
2 Small Perimeter Print Speed 7 Support Material Speed
3 External Perimeter Speed 8 Bridges Print Speed
4 Infill Speed 9 Gap Fill Print Speed
5 Solid Infill Speed 10 Help Text
1
5
2
6
9
3
7
10
4
8