Robox RBX01 - Page 71

7171
www.cel-robox.com
5.0 AutoMaker Soware
• Support Pattern
This option allows you to set the pattern used to generate the support
material - with some options requiring less material, giving faster print times.
RectilinearRectilinear Grid Honeycomb Pillars
• Pattern Spacing (mm)
This specifies the spacing in millimetres between support extrusions i.e. the
density of the support material.
• Pattern Angle ( ° )
This option allows the direction of the support lines to be rotated in the XY
plane.
• Help Text
This box displays a brief explanation of the setting which is highlighted
(changes on mouseover).