www.cel-robox.com
3.0 Getting Started
3.2 Unpacking Robox®
This section explains how to safely unpack your new Robox® and get it ready
for production! Your new micro manufacturing platform has been carefully
assembled and packaged at our factory to arrive with you in perfect condition.
Please follow the instructions below carefully to avoid causing any damage.
1. Carefully cut the tape along the top of the box, being careful not to cut too
deep, and open the box.
2. Remove the accessories box from the side by pulling on the plastic handle.
3. Li Robox® from the box using the two handles in the packing trays on either
side.
To Next Page
Loading...