Robox RBX01 - Using this Guide

88
www.cel-robox.com
1.0 Introduction
1.3 Using This Guide
This user guide contains the information you need to setup and use your Robox®
micro-manufacturing platform.
1.3.1 How This Guide Is Organised
This guide contains the following parts:
• Section 1 - Welcome
This section outlines all the important safety considerations, international
certifications and information on this user guide and accompanying
documentation.
• Section 2 - Overview
This section describes the features and specifications of the product, along
with a brief introduction of the printing process and overview diagrams of
the major hardware features.
• Section 3 - Getting Started
This section explains how to begin producing items with your new
micro-manufacturing platform. It includes how to unpack your new product,
soware installation and connectivity.
• Section 4 - Using Robox®
This section describes in detail how to use Robox® to produce items,
including loading and unloading filament, replacing the print head and
removing / replacing the print bed.
• Section 5 - AutoMaker™ Soware
This section explains how to use the included AutoMaker™ soware to set up
your production run. In includes detailed information on printer settings and
advanced options.
• Section 6 - Finishing Parts
This section explains how you can improve the quality of your parts aer
production.
• Section 7 - Troubleshooting and Maintenance
This section includes essential maintenance procedures to keep your
Robox® running smoothly, along with a troubleshooting guide to help you to
fine tune and diagnose any problems.