Robox RBX01 - Advanced Settings - Extrusion

6464
www.cel-robox.com
5.0 AutoMaker Soware
5.5.6 Advanced Settings - Extrusion
These settings allow you to adjust all the parameters which aect the
extrusion of plastic and generally relate to print quality and speed. By tuning
these values, users can control the appearance, strength and surface finish of
objects, as well as dramatically aecting print speed by varying layer height,
fill pattern, density and perimeters.
1 Layer Height 5 Top and Bottom Layers
2 Fill Density 6 Number of Perimeters
3 Fill Pattern 7 Brim Width
4 Infill Every ... Layers 8 Help Text
1
5
2
6
3
7
8
4