Robustel R1510 User Manual

Robustel R1510 User Guide
RT_UG_R1510_v.1.0.1 Dec. 31, 2019 91/140
General Settings @ OpenVPN
Item
Description
Default
Max number of
clients
Set the maximum number of clients allowed to access the OpenVPN
server.
10
Keepalive Interval
Set keepalive (ping) interval to check if the tunnel is active.
20
Keepalive Timeout
Set the keepalive timeout. Trigger OpenVPN restart after n seconds pass
without reception of a ping or other packet from remote.
120
MTU
Set the maximum transmission unit.
1500
Data fragmentation
Set the maximum frame length.
Null
Private Key Password
Enter the private key password under the “X509CA” and “X509CA
Password” authentication type.
Null
Enable Compression
Click the toggle button to enable/disable this option. Enable to
compress the data stream of the header.
ON
Enable default
gateway
Click the toggle button to enable/disable the default gateway function.
After being enabled, the local tunnel address is pushed as the default
gateway of the peer device.
OFF
Enable NAT
Click the toggle button to enable/disable the NAT option. When
enabled, the source IP address of host behind router will be disguised
before accessing the remote OpenVPN client.
OFF
Receive DNS push
Click the toggle button to enable/disable receiving DNS push. After
being enabled, it is allowed to receive DNS information pushed by the
peer.
OFF
Verbose Level
Select the level of the output log and values from 0 to 11.
 0: No output except fatal errors
 1~4: Normal usage range
 5: Output R and W characters to the console for each packet read
and write
 6~11: Debug info range
0
Advanced Settings @ OpenVPN
Enable HMAC
Firewall
Click the toggle button to enable/disable this option. Add an additional
layer of HMAC authentication on top of the TLS control channel to
protect against DoS attacks.
OFF
Enable PKCS#12
Click the toggle button to enable/disable the PKCS#12 certificate. It is an
exchange of digital certificate encryption standard, used to describe
personal identity information.
OFF
Enable nsCertType
Click the toggle button to enable/disable nsCertType. Require that peer
certificate was signed with an explicit nsCertType designation of
"server".
OFF
Enable Crl
Click the toggle button to enable/disable the Crl. Once enabled, the
client certificate can be revoked.
OFF
Enable client to client
Click the toggle button to enable/disable this option. When enabled,
clients can communicate with each other.
OFF

Robustel R1510 Specifications

General

Brand	Robustel
Model	R1510
Category	Network Router
Language	English