Robustel R3000-4L - Page 48

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.4.0.0 27 March, 2017 47/136
Confidential
This section introduces you to set the parameters of the WAN port.
Click button of eth0 to configure its parameters. The port assignment can be changed by selecting from the drop
down list.
Port Settings
Item
Description
Default
Index
Indicate the ordinal of the list.
--
Port
Show the editing port, read only.
--
Port Assignment
Choose the Ethernet port’s type, as a WAN port or a LAN port. When setting the
port as a LAN port in Interface > LAN > LAN > Network Settings > General Settings,
you can click the drop-down list to select from “lan0” or “lan1”.
lan0