Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.4.0.0 27 March, 2017 114/136
Confidential
The window is displayed below by clicking Interface > Cellular > Advanced Cellular Settings.
Click the edit button of SIM1 to set its parameters according to your application request.
When finished, click Submit > Save & Apply for the configuration to take effect.
4.2.2 SMS Remote Control
R3000 supports remote control via SMS. You can use the following commands to get the status of R3000, and set all
the parameters of R3000. There are three authentication types for SMS control. You can select from “Password”,
“Phonenum” or “Both”.
An SMS command has the following structure:
1. Password mode—Username: Password;cmd1;cmd2;cmd3; …cmdn (available for every phone number).
2. Phonenum mode--cmd1; cmd2; cmd3; … cmdn (available when the SMS was sent from the phone number
which had been added in R3000’s phone group).
3. Both mode-- Username: Password;cmd1;cmd2;cmd3; …cmdn (available when the SMS was sent from the phone
number which had been added in R3000’s phone group).
SMS command Explanation:
1. User name and Password: use the same username and password as WEB manager for authentication.
2. cmd1, cmd2, cmd3 to Cmdn, the command format is the same as the CLI command, more details about CLI cmd
To Next Page
Loading...
Need help?
General
