Robustel R3000-4L User Manual

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.4.0.0 27 March, 2017 87/136
Confidential
Local Virtual IP Address
Set the local virtual IP address of the GRE tunnel.
Null
Local Virtual Netmask
Set the local virtual Netmask of the GRE tunnel.
Null
Remote Virtual IP Address
Set the remote virtual IP Address of the GRE tunnel.
Null
Enable Default Route
Click the toggle button to enable/disable this option. When enabled, all
the traffics of R3000 Router will go through the GRE VPN.
OFF
Enable NAT
Click the toggle button to enable/disable this option. This option must be
enabled when router under NAT environment.
Disable
Secrets
Set the key of the GRE tunnel.
Null
Status
This section allows you to view the status of GRE tunnel.
3.20 Services > Syslog
This section allows you to set the syslog parameters. The system log of R3000 Router can be saved in the local, also
supports to be sent to remote log server and specified application debugging. By default, the “Log to Remote” option
is disabled.
The window is displayed as below when enabling the “Log to Remote” option.

Robustel R3000-4L Specifications

General

Brand	Robustel
Model	R3000-4L
Category	Network Router
Language	English