Robustel R3000 Lite - Specifications

Robustel R3000 Lite User Guide
RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 11/109
Confidential
1.3 Specifications
Cellular Interface
 Number of ports: 2 (MAIN + AUX)
 Connector: SMA, female
 SIM: 2 (3.0 V & 1.8 V)
 Standards: GSM/GPRS/EDGE/WCDMA/TD-SCDMA/CDMA (CDMA 1X/EVDO)/HSDPA/HSUPA/HSPA+/
DC-HSPA+/FDD LTE/TDD LTE
GSM: max DL/UL = 9.6/2.7 Kbps
GPRS: max DL/UL = 86 Kbps
EDGE: max DL/UL = 236.8 Kbps
WCDMA/TD-SCDMA: max DL/UL = 2.8 Mbps/384 Kbps
EVDO: max DL/UL = 5.4 Mbps/14.7 Kbps
HSPA+: max DL/UL = 21/5.76 Mbps, fallback to 2G
DC-HSPA+: max DL/UL = 42/5.76 Mbps, fallback to 2G
FDD LTE: max DL/UL = 100/50 Mbps, fallback to 2G/3G
TDD LTE: max DL/UL = 100/50 Mbps, fallback to 2G/3G
Cellular interface
The number of antenna interface
3G HSDPA
1
3G HSPA+
2
4G LTE
2
Ethernet Interface
 Number of ports: 1 x 10/100 LAN port
 Magnet isolation protection: 1.5 KV
Serial Interface
 Number of ports: 1 x RS-232 + 1 x RS-485
 Connector: DB9, female
 ESD protection: ±15 KV
 Baud rate: 300 bps to 230400 bps
 Parameters: 8E1, 8O1, 8N1, 8N2, 7E2, 7O2, 7N2, 7E1
 RS232: TxD, RxD, RTS, CTS, GND
 RS485: Data+ (A), Data- (B)
Others
 Reset button : 1 x RST
 Expansion: 1 x USB 2.0 host up to 480 Mbps
 LED indicators: 1 x RUN, 1 x PPP, 1 x USR, 3 x RSSI
 Built-in: RTC, Watchdog, Timer
Software (Basic features of RobustOS)
 Network protocols: PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, HTTPs, DNS, ARP, RIP, OSPF, NTP, SMTP, Telnet,
VLAN, SSH2, DDNS, etc.