Robustel R3000 Lite - Network > Route; Static Route

Robustel R3000 Lite User Guide
RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 48/109
Confidential
3.12 Network > Route
This section allows you to set the static route. Static route is a form of routing that occurs when a router uses a
manually-configured routing entry, rather than information from a dynamic routing traffic. Route Information
Protocol (RIP) is widely used in small network with stable use rate. Open Shortest Path First (OSPF) is made router
within a single autonomous system and used in large network.
Static Route
Click to add static routes. The maximum count is 20.
Static Route
Item
Description
Default
Index
Indicate the ordinal of the list.
--
Description
Enter a description for this static route.
Null
Destination
Enter the IP address of destination host or destination network.
Null
Netmask
Enter the Netmask of destination host or destination network.
Null
Gateway
Define the gateway of the destination.
Null
Interface
Choose the corresponding port of the link that you want to configure.
wwan1