Robustel R3000 Lite - System > Profile

Robustel R3000 Lite User Guide
RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 84/109
Confidential
Sniffer
Item
Description
Default
Interface
Choose the interface according to your Ethernet configuration.
All
Host
Filter the packet that contain the specify IP address.
Null
Packets Request
Set the packet number that the router can sniffer at a time.
1000
Protocol
Select from “All”, “IP”, “TCP”, “UDP” and “ARP”.
All
Port
Set the port number for TCP or UDP that is used in sniffer.
Null
Status
Show the current status of sniffer.
Null
Click this button to start the sniffer.
--
Click this button to stop the sniffer. Once you click this button, a new log file
will be displayed in the following List.
--
Capture Files
Every times of sniffer log will be saved automatically as a new file. You can find
the file from this Sniffer Traffic Data List and click to download the log, click
to delete the log file. It can cache a maximum of 5 files.
Null
3.31 System > Profile
This section allows you to import or export the configuration file, and restore the router to factory default setting.
Profile
Item
Description
Default
Import Configuration File
Reset Other Settings to
Default
Click the toggle button as “ON” to return other parameters to default
settings.
OFF