Robustel R3000 Lite - Interface > USB

Robustel R3000 Lite User Guide
RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 43/109
Confidential
Status
Item
Description
IMEI
Show the IMEI (International Mobile Equipment Identity) number of the radio
module.
Firmware Version
Show the current firmware version of the radio module.
This page allows you to check the AT Debug.
AT Debug
Item
Description
Default
Command
Enter the AT command that you want to send to cellular module in this
text box.
Null
Result
Show the AT command responded by cellular module in this text box.
Null
Click the button to send AT command.
--
3.10 Interface > USB
This section allows you to set the USB parameters. The USB interface of the router can be used for firmware upgrade
and configuration upgrade.
General Settings @ USB
Item
Description
Default
Enable USB
Click the toggle button to enable/disable the USB option.
ON
Enable Automatic
Firmware Updating
Click the toggle button to enable/disable this option. Enable to update
automatically the router’s firmware when inserting a USB storage device with
a router’s firmware.
ON