24 Rockwell Automation Publication 856T-UM001B-EN-P - April 2021
Chapter 3 Configure the 856T-B24LC IO-Link Module
2. The module window pops up and shows the available modules. Use the
filter to select 1734-4IOL module and click Create.
3. The IO-Link Configuration screen appears, click OK.
Close the selection popup window if still visible.
4. The IO-Link Master can now be configured. To configure the device, a
device-specific IODD (I/O Device Description) file is required. The
following section shows how to register the IODD file.
Register the 856T-B24LC
Module IODD File
To initialize a device on an IO-Link Master, register the IODD of the device.
The IO Device Description (IODD) files contain the information that is related
to the device, integrated into the system environment. There are three ways to
get the IODD file:
• The 856T-B24LC module has an embedded IODD that can be
automatically loaded into Studio 5000. Customer does not need to
register the IODD file.
• The IODD file for the 856T-B24LC module can be downloaded from
rok.auto/pcdc
and loaded manually to Studio 5000.
• The 856T-B24LC module IODD is available in the IODD finder section of
the IO-Link.com website.
To Next Page
Loading...
