Rockwell Automation Publication 856T-UM001B-EN-P - April 2021 35
Chapter 4 IO-Link Parameters
Common Tab
The Common tab contains the following device information:
Table 3 - Common Tab
Parameter Description
Vendor Provides the vendor name that is assigned to Vendor ID.
Vendor Text
Field used to describe additional product information. In this case, it displays product
Internet webpage address.
Vendor ID
Describes the worldwide unique vendor ID of the manufacturer of the product as
designated in the IO-Link Consortium.
URL Displays the vendor URL.
Device Provides the specific catalog number of the product.
Description This parameter displays the product description.
Device ID Displays the unique device ID as defined in the IO-Link specifications.
IO-Link Revision Displays the current IO-Link version that the device supports.
Hardware Revision Displays the device hardware revision number.
Firmware Revision Displays the device firmware revision number.
Bitrate Displays the supported bitrate for communications as defined in the IO-link 1.1 standard.
Minimum Cycle Time
The parameter to inform the master about the shortest cycle time supported by the
device. Value is given in microseconds.
IODD Information about the IODD that has been used to configure the 856T-B24LC module.
SIO mode Information whether the device supports the SIO (Standard Input and Output).
Document Version
Displays information about the IODD version that has been used to configure the IO-Link
device
Date of Creation This field displays date when the IODD file has been CRC stamped
To Next Page
Loading...
