42 Rockwell Automation Publication 856T-UM001B-EN-P - April 2021
Chapter 4 IO-Link Parameters
Operation Information Unit
Operating Hours-Since
inception
Indicates the time the IO-link module has been functional since first powered. This value cannot
be reset and is read-only.
Hours
Operating Hours-Since
Power Up
Indicates the amount of time the IO-link module has been functional since last power cycle. This
value is read-only
Hours
Communication Characteristics
Direct Parameters 1.Min
Cycle Time
Displays the minimum cycle time of the IO-Link device. This value indicates the time intervals at
which the master addresses the device. This value is read-only.
ms
Direct Parameters 1.Master
Cycle Time
This parameter gives the actual cycle duration that is used by the Master to address the IO-Link
device. This value is read/write.
ms
Direct Parameters 1.IO-Link
Version ID
Displays the standard version applicable to Master-IO-link device communication 1.1
Table 7 - Diagnosis Tab (Continued)
Parameter Description Value
To Next Page
Loading...
