EasyManua.ls Logo

Rockwell Automation Allen-Bradley Micro830

Rockwell Automation Allen-Bradley Micro830
290 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
186 Rockwell Automation Publication 2080-UM002L-EN-E - November 2021
Appendix A Specifications
Isolation voltage
250V (continuous), Reinforced Insulation Type, Outputs to Aux and
Network, Inputs to Outputs
Type tested for 60 s @ 720V DC, Inputs to Aux and Network, 3250V
DC Outputs to Aux and Network, Inputs to Outputs
50V (continuous), Reinforced Insulation Type, I/O to Aux and
Network, Inputs to Outputs
Type tested for 60 s @ 720V DC, I/O to Aux and Network, Inputs to
Outputs
Pilot duty rating C300, R150
Insulation stripping length 7 mm (0.28 in.)
Enclosure type rating Meets IP20
North American temp code T4
(1) Use this Conductor Category information for planning conductor routing. See Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
General Specifications — Micro830 10-point Controllers (Continued)
Attribute 2080-LC30-10QWB 2080-LC30-10QVB
Inputs — Micro830 10-point Controllers
Attribute
2080-LC30-10QWB, 2080-LC30-10QVB
High-Speed DC Input (Inputs 0…3) Standard DC Input (inputs 4 and higher)
Number of Inputs 4 2
Input group to backplane isolation
Verified by one of the following dielectric tests: 1,414V DC for 2 s
75V DC working voltage (IEC Class 2 reinforced insulation)
Voltage category 24V DC sink/source
Off-state voltage, max 5V DC
On-state voltage, nom 24V DC
On-state voltage range
16.8…26.4V DC @ 65 °C (149 °F)
16.8…30.0V DC @ 30 °C (86 °F)
10…26.4V DC @ 65 °C (149 °F)
10…30.0V DC @ 30 °C (86 °F)
Off-state current, max 1.5 mA
On-state current, min 5.0 mA @ 16.8V DC 1.8 mA @ 10V DC
On-state current, nom 8.8 mA @ 24V DC 8.5 mA @ 24V DC
On-state current, max 12.0 mA @ 30V DC
Nominal impedance 3 kΩ 3.74 kΩ
IEC input compatibility Type 3
AC input filter setting
8 ms for all embedded inputs
(In the Connected Components Workbench software, go to the Embedded I/O configuration window to reconfigure the filter setting for each
input group)
Isolated AC Inputs — Micro830 10-point Controllers
Attribute 2080-LC30-10QWB, 2080-LC30-10QVB (Inputs 0…3)
On-state voltage, nom 12/24V AC @ 50/60 Hz
Off-state voltage, min 4V AC @ 50/60Hz
Operating frequency, nom 50/60 Hz

Table of Contents

Other manuals for Rockwell Automation Allen-Bradley Micro830

Related product manuals