Summary of Changes
The information below summarizes the changes to the PowerFlex 70
User Manual since the February 2005 release.
Parameter Updates
The following parameters have been added or updated with firmware
version 3.002.
Additional Manual Updates
Parameter Number Description Page
[Torque Estimate] 015 New 3-12
[Motor OL Mode] 050 New 3-14
[Mtr OL Trip Time] 221 New 3-42
[Drive Status 3] 222 New 3-42
[Status 3 @ Fault] 223 New 3-42
[Spd Err Filt BW] 448 New 3-28
[Fiber Control] 620 New 3-59
[Fiber Status] 621 New 3-59
[Sync Time] 622 New 3-59
[Traverse Inc] 623 New 3-59
[Traverse Dec] 624 New 3-59
[Max Traverse] 625 New 3-59
[P Jump] 626 New 3-59
[Motor NP RPM] 044 Updated 3-13
[Stop/Brk Mode A/B] 155, 156 Updated 3-30
[Start Inhibits] 214 Updated 3-40
[Last Stop Source] 215 Updated 3-41
[Digital Inx Sel] 361-366 Updated 3-55
[Digital Outx Sel] 380, 384 Updated 3-57
Description of New or Updated Information Page
Catalog number explanation updated P-5
External filter information added 1-24
Parameters 140 [Accel Time 1] and 141 [Accel Time 2]
minimum value corrected to 0.0 Secs.
3-29
Parameters 142 [Decel Time 1] and 143 Decel Time 2]
minimum value corrected to 0.0 Secs.
3-29
Conversion formula added to description of parameter
244-250 [Fault x Time].
3-45
Fast Brake application note added. C-6
To Next Page
Loading...
