Rohde & Schwarz CMU 300 - Path Configuration - Subsystem Multitone:af1 Channel:filter

CMU Audio Generator and Analyzer (with Option CMU-B41)
1100.4903.12 6.83 E-10
DEFault:MULTitone:AF1Channel:TDEFinition <Enable> Default Settings
DEFault:MULTitone:AF2Channel:TDEFinition <Enable>
<Enable>
Description of parameters Def. value Def. unit FW vers.
ON |
OFF
The parameters are set to their default values
Some or all parameters differ from the default values
ON – V3.0
Description of command
If used as a setting command with the parameter ON this command sets all parameters of the subsystem to their
default values (the setting OFF results in an error message).
If used as a query the command returns whether all parameters are set to their default values (ON) or not (OFF).
DEFault:MULTitone:TDEFinition <Enable> Default Settings
<Enable>
Description of parameters Def. value Def. unit FW vers.
ON |
OFF
The parameters are set to their default values
Some or all parameters differ from the default values
ON – V3.0
Description of command
If used as a setting command with the parameter ON this command sets all parameters of the subsystem (includ-
ing AF1Channel and AF2Channel) to their default values (the setting OFF results in an error message).
If used as a query the command returns whether all parameters are set to their default values (ON) or not (OFF).
Path Configuration – Subsystem MULTitone:AF1Channel:FILTer
The subsystem MULTitone:AF1Channel:FILTer configures the voice-processing equipment used for
the Multitone measurement. The subsystem corresponds to the Filters tab of the popup menu Multitone
Configuration.