Rohde & Schwarz CMU 300 - Table 6-1 List of Remote-Control Commands: CMU Base System; List of Commands

CMU List of Commands
1100.4903.12 6.89 E-10
List of Commands
In the following, all remote-control commands of function group RF Non-Signalling implemented in the
CMU will be listed with their parameters and page numbers. Generally, they are arranged alphabetically
according to the second keyword of the command so that related commands belong to the same
group. For a list of common commands see Table 6-1 in section Common Commands.
Table 6-1 List of remote-control commands: CMU base system
Command Parameters Remarks Page
Subsystem COMMunicate (interface parameters)
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess 0 to 30 with query 6.11
SYSTem:COMMunicate:SERial<1|2>:APPLication – query only 6.11
SYSTem:COMMunicate:SERial<1|2>:TRANsmit:PACE XON|ACK|NONE with query 6.12
SYSTem:COMMunicate:SERial<1|2>[:RECeive]:BAUD 110 to 115200 with query 6.11
SYSTem:COMMunicate:SERial<1|2>[:RECeive]:BITs 7|8 with query 6.12
SYSTem:COMMunicate:SERial<1|2>[:RECeive]:PARity[:TYPE] NONE|ODD|EVEN with query 6.12
SYSTem:COMMunicate:SERial<1|2>[:RECeive]:STOP 1|2 with query 6.12
Subsystem ERRor (error queue)
SYSTem:ERRor? query only 6.5
*GTL (Go to Local)
*GTL – no query 6.15
Subsystem GTRMode (go to remote)
SYSTem:GTRMode:COMPatible ON|OFF with query 6.15
*LLO (local lockout)
*LLO TRUE | FALSe no query 6.17
Subsystem MISC (keyboard settings)
SYSTem:MISC:KBEep ON|OFF with query 6.14
SYSTem:MISC:KEYBoard US|GR with query 6.14
Subsystem MMEMory (mass memory)
MMEMory:CDIRectory <DirectoryName> no query 6.20
MMEMory:COMMent <Comment> with query 6.19
MMEMory:COPY <FileSource>, <msus1>,
<FileDest>, <msus2> |
<FileSource>, <FileDest>
no query 6.20
MMEMory:DATA? <FileName> ,<Data> with query 6.22
MMEMory:DELete <FileName> [,<msus>] no query 6.20
MMEMory:DIRectory[:CURRent]? <DirectoryName> query only 6.19
MMEMory:INFO? <FileName> [,<msus>] query only 6.18
MMEMory:MKDir <DirName> [,<msus>] no query 6.20
MMEMory:MOVE <FileSource>, <msus1>,
<FileDest>, <msus2> |
<FileSource>, <FileDest>
no query 6.21
MMEMory:MSIS [<msus>] with query 6.19
MMEMory:RECall:CURRent <FileName> [,<msus>] no query 6.23