Common Measurement Settings
R&S
®
FSW
366User Manual 1173.9411.02 ─ 19
Fig. 6-18: Unwanted mixer products displayed for small span
6.2.5.2 External Mixer Settings
The external mixer is configured in the "External Mixer" tab of the "Input" dialog box
which is available when you do one of the following, if the R&S FSW-B21 option is
installed:
●
Press the INPUT/OUTPUT key, then select the "External Mixer Config" softkey.
●
From the "Overview", select "Input", then switch to the "External Mixer" tab under
"Input Source".
Note that external mixers are not supported in MSRA/MSRT mode.
● Mixer Settings....................................................................................................... 366
● Basic Settings....................................................................................................... 370
● Managing Conversion Loss Tables.......................................................................372
● Creating and Editing Conversion Loss Tables......................................................373
Mixer Settings
In this tab you configure the band and specific mixer settings.
Data Input and Output
To Next Page
Loading...
