Rohde & Schwarz FSW43 - Page 494

Common Analysis and Display Functions
R&S
®
FSW
494User Manual 1173.9411.02 ─ 19
The markers are distributed among 3 tabs for a better overview. By default, the first
marker is defined as a normal marker, whereas all others are defined as delta markers
with reference to the first marker. All markers are assigned to trace 1, but only the first
marker is active.
Selected Marker..........................................................................................................494
Marker State................................................................................................................494
Marker Position (X-value)............................................................................................495
Frame (Spectrogram only).......................................................................................... 495
Marker Type................................................................................................................495
Reference Marker....................................................................................................... 495
Linking to Another Marker...........................................................................................495
Assigning the Marker to a Trace................................................................................. 496
Select Marker..............................................................................................................496
All Markers Off............................................................................................................ 496
Selected Marker
Marker name. The marker which is currently selected for editing is highlighted orange.
Remote command:
Marker selected via suffix <m> in remote commands.
Marker State
Activates or deactivates the marker in the diagram.
Remote command:
CALCulate<n>:MARKer<m>[:STATe] on page 932
CALCulate<n>:DELTamarker<m>[:STATe] on page 930
Marker Usage