Rohde & Schwarz FSW43 - Page 941

Remote Commands
R&S
®
FSW
941User Manual 1173.9411.02 ─ 19
Usage: Event
Manual operation: See "Search Mode for Next Peak" on page 499
CALCulate<n>:DELTamarker<m>:MINimum:LEFT
This command moves a delta marker to the next higher minimum value.
The search includes only measurement values to the right of the current marker posi-
tion.
In the spectrogram, the vertical marker position remains the same.
Usage: Event
Manual operation: See "Search Mode for Next Peak" on page 499
CALCulate<n>:DELTamarker<m>:MINimum:NEXT
This command moves a marker to the next higher minimum value.
In the spectrogram, the vertical marker position remains the same.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 499
See "Search Next Minimum" on page 506
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK]
This command moves a delta marker to the minimum level.
In the spectrogram, the command moves a delta marker horizontally to the minimum
level in the currently selected frame. The vertical marker position remains the same.
If the marker is not yet active, the command first activates the marker.
Usage:
Event
Manual operation: See "Marker Search Type" on page 503
See "Search Minimum" on page 506
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt
This command moves a delta marker to the next higher minimum value.
The search includes only measurement values to the right of the current marker posi-
tion.
In the spectrogram, the vertical marker position remains the same.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 499
Analyzing Measurements (Basics)