Rohde & Schwarz FSW43 - Page 940

Remote Commands
R&S
®
FSW
940User Manual 1173.9411.02 ─ 19
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT...........................................................940
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT.......................................................... 940
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]........................................................ 940
CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt..........................................................940
CALCulate<n>:DELTamarker<m>:MINimum:LEFT............................................................941
CALCulate<n>:DELTamarker<m>:MINimum:NEXT........................................................... 941
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK]......................................................... 941
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt...........................................................941
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT
This command moves a delta marker to the next higher value.
The search includes only measurement values to the left of the current marker posi-
tion.
In the spectrogram, the vertical marker position remains the same.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 499
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT
This command moves a marker to the next higher value.
In the spectrogram, the vertical marker position remains the same.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 499
See "Search Next Peak" on page 506
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]
This command moves a delta marker to the highest level.
In the spectrogram, the command moves a marker horizontally to the highest level in
the currently selected frame. The vertical marker position remains the same.
If the marker is not yet active, the command first activates the marker.
Usage:
Event
Manual operation: See "Marker Search Type" on page 503
See "Peak Search" on page 506
CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt
This command moves a delta marker to the next higher value.
The search includes only measurement values to the right of the current marker posi-
tion.
In the spectrogram, the vertical marker position remains the same.
Analyzing Measurements (Basics)