Roland FR-3x - Securing the Adapter And;Or MIDI Cable

FR -3x V-A cco rdio l1
Before you start playing
Securing the adapter and/or MIDI
cable
Proceed as follows to ensure that the adapter cable -or
a MIDI cable- doesn't come loose while YOLI are play-
ing.
1. Unclip the indicated part of the cushion at
the back of the FR-3x.
T he cu shion is attached with severai clips. You only
nee d to un c lip the part show n in the illustrati on
below.
Note t he guide nex t to th e righ t clip closest to the
cOl1nec t ion panel.
2. Connect the small plug of the AC adaptor
cable to the FR-3x's DC IN socket and wind
the
cable around the guide:
You can also connect the MIDI cable to the M IDI OUT!
IN socket and w ind it aro u nd the gui de like the
adapter cable.
20
3. Reinstall the cushion, taking care to secure
the
adapter cable and/or MIDI cable vou
have
just installed.
When finished, t he FR -3x sho uld look as fo ll ows :
4. Reverse these steps to remove and discon-
nect the adapter when vou want to stop
plaving.