Roland FR-4X - Page 65

65
Menu Options
Parameter Explanation/Value
Touch
(Touch)
“MED (Medium)”: The
velocity value will not be
less than 17 (0x11) even
when you play the most
weak keyboard. This is the
middle of the “Low” and
the “High.”
“HIGH (High)”: The
velocity value is controlled
in the range of 1 (0x01) ~
127 (0x7F) by the strength
with which you play the
keyboard. This setting is
the most wide range of
velocity control.
“F.L+B (Fixed
Low+Bellows)”: You will
control the velocity in the
movement of the bellows
at the timing you play the
keyboard. However, the
velocity value will not be
less than 20 (0x14).
“F.M+B (Fixed
Med.+Bellows)”: You will
control the velocity in the
movement of the bellows
at the timing you play the
keyboard. However, the
velocity value will not be
less than 50 (0x32).
“F.H+B (Fixed
High+Bellows)”: You will
control the velocity in the
movement of the bellows
at the timing you play the
keyboard. However, the
velocity value will not be
less than 80 (0x50).
“BELW (Bellows)”: You will
control the velocity in the
movement of the bellows
at the timing you play the
keyboard.
Poly
(Polyphonic)
(Not for VTW Organ Tone)
For details, refer to “Orchestra Edit -
Poly/Mono” (p. 55)/“Orchestra Edit -
Portament Time” (p. 55).
PortTime
(Portamento Time)
MIDI TX
(MIDI Tx)
Pressing the [ENTER/YES] button lets you
make MIDI TX settings for the orchestra
free bass part.
MIDI TX
These parameters specify MIDI transmission for the orchestra free
bass part.
These settings can be saved for each set, and you can use different
MIDI settings for each register within the set.
Parameter Explanation/Value
Note Tx
(Note Tx)
For details, refer to Accordion Edit - MIDI
TX (p. 46).
Octave
(Octave)
Parameter Explanation/Value
CC 00
(Control Change 00)
CC 32
(Control Change 32)
PC
(Program Change)
These parameters specify the program
change (PC) and bank select (CC00, CC32)
values.
You can use these three values to recall
sounds and memories.
If you choose “Off,” the message is not
transmitted.
If you choose “Std,” pressing a left
hand register button will transmit a PC
message of the same value as the left
hand register button number, a CC00
message of “0,” and a CC32 message of
“0.”
Std, Off, 0–127
Std, Off, 0–127
Std, Off, 1–128
Volume
(Volume)
For details, refer to Accordion Edit - MIDI
TX (p. 46).
Panpot
(Panpot)
Reverb
(Reverb)
Chorus
(Chorus)
Velocity
(Velocity)
Express
(Expression)