22
Scene Edit/Part Edit
Detailed settings can be made using the edit pages, which you can access from the SCENE TOP screen by using the [Í] [Ë] buttons.
SCENE
ARP PART
EDIT
ARP
COMMON
EDIT
SCENE TOP screen
SCENE PART
MODEL
BANK
à  Â
SCENE
COMMON
EDIT
SCENE PART
EDIT
SCENE ZONE
EDIT
SCENE PART
MFX
SCENE
EFFECT: Dly
SCENE
EFFECT: Rev
SCENE
EFFECT: Cho
SCENE
EFFECT: OD
SCENE
SELECT
[ENTER] (INIT) button
[EXIT] button
* Press the [EXIT] button to return to the SCENE TOP
screen.
Conguring Scene Common Settings (Scene Edit)
The scene edit pages let you make settings that are common to the scene.
1. Press the [SCENE] button.
The SCENE TOP screen appears.
MEMO
If you hold down the [SCENE] button and press the [PART/FUNC] button, the part list screen appears.
2. Use the [Í] [Ë] buttons to move to the scene edit page for the item that you want to edit.
3. Use the [ÇSELECTÉ] knob to select the parameter that you want to edit, and use the [- VALUE +] knob to change
the value.
For details, refer to “Parameter Guide” (PDF).
4. If you want to save the setting, execute the Scene Write operation.
* If you want to save a tone individually, use the tone write operation (p. 26).
4-1.
Hold down the [SHIFT] button and press the [MENU] (WRITE) button.
The WRITE MENU screen appears.
4-2.
Use the [ÇSELECTÉ] knob to select “SCENE,” and then press the [ENTER] (INIT) button.
4-3.
Use the [ÇSELECTÉ] knob and the [- VALUE +] knob to select the save-destination, and then press the [ENTER] (INIT) button.
To rename the scene that’s being saved, use the [Í] [Ë] buttons to move the cursor and use the [- VALUE +] knob to select the characters.
4-4.
Press the [ENTER] (INIT) button.
4-5.
To execute, press the [ENTER] (INIT) button.
Basic settings related to I-Arpeggio
(ARP COMMON EDIT)
These are I-Arpeggio basic settings. You can also specify the rhythm
pattern that’s used for arpeggio performance, and the keyboard
region that is detected by I-Arpeggio.
Basic settings for scenes (SCENE COMMON EDIT)
These are basic settings for scenes.
These settings let you assign functions to controllers such as the
buttons or knobs, and congure the settings for controlling an
external device.
Delay settings (SCENE EFFECT: Dly)
These are settings for the delay that is used in common by all parts.
* These settings are valid only if the “SYSTEM EFFECT: Dly” source is set to
“SCENE.”
Ø “Editing the System Settings (System)” (p. 43)
Reverb settings (SCENE EFFECT: Rev)
These are settings for the reverb that is used in common by all parts.
* These settings are valid only if the “SYSTEM EFFECT: Rev” source is set to
“SCENE.”
Ø “Editing the System Settings (System)” (p. 43)
Editing a Scene
(SCENE EDIT)
To Next Page
Loading...
