Roland JUNO-X - Ä Differentiating Multiple JUNO-X Units (Bluetooth ID)

38
Using the Bluetooth® Functionality
Dierentiating Multiple JUNO-X Units
(Bluetooth ID)
If you are pairing with your mobile device in a place where there is
more than one JUNO-X, you can assign a device ID (an identifying
number) for each one. When you specify a device ID, the specied
number is added to the end of the device name that appears on your
mobile device.
1
Pair with this JUNO-X
2
3
1. Press the [MENU] (WRITE) button.
The MENU screen appears.
2. Use the [ÇSELECTÉ] knob to select “SYSTEM,” and
then press the [ENTER] (INIT) button.
3. Use the [ÇSELECTÉ] knob to select “Bluetooth ID.”
4. Use the [- VALUE +] knob to change the value.
Parameter
[ÇSELECTÉ] knob
Value
[- SELECT +]
knob
Explanation
Bluetooth ID
OFF,
1–9
Species the number added to the end of this unit’s
device name shown in a Bluetooth-connected app.
Set to “OFF”
“JUNO-X Audio,” “JUNO-X MIDI”
(default value)
Set to “1” “JUNO-X Audio 1,” “JUNO-X MIDI 1”
5. To save the settings, hold down the [SHIFT] button
and press the [MENU] (WRITE) button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
6. To execute, press the [ENTER] (INIT) button.