Roland JUNO-X - Convenient Functions (UTILITY Screen); Ä Backing-Up Data to a USB Flash Drive; Formatting a USB Flash Drive (FORMAT USB MEMORY); Backing-Up Data to USB Flash Drive (BACKUP)

45
Backing-Up Data to a USB Flash Drive
Connect a USB ash drive.
* Use a commercially available USB ash drive. Note that we cannot guarantee that all commercially available USB ash drives will work.
USB ash drive
Convenient Functions
(UTILITY Screen)
Formatting a USB Flash Drive
(FORMAT USB MEMORY)
Be sure to format your USB ash drive on this instrument, if you are
using it for the rst time.
NOTE
If the USB ash drive contains important data, be aware that this operation erases
all data from the drive.
1. Press the [MENU] (WRITE) button.
2. Use the [ÇSELECTÉ] knob to select “UTILITY,” and
then press the [ENTER] (INIT) button.
3. Use the [ÇSELECTÉ] knob to select “FORMAT USB
MEMORY,” and then press the [ENTER] (INIT) button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
4. To execute, use the [- VALUE +] knob or the [Í] [Ë]
buttons to select “OK,” and then press the [ENTER]
(INIT) button.
When formatting is complete, the screen indicates “Completed!”
* Never turn o the power or disconnect the USB ash drive during a
process, such as while the “Executing…” display is shown.
Backing-Up Data to USB Flash Drive (BACKUP)
Here’s how to back up user data to a USB ash drive.
Data that is backed up
¹ All scene data (including vocoder and arpeggio settings)
¹ User tone data
¹ System settings (including system eects)
1. Press the [MENU] (WRITE) button.
2. Use the [ÇSELECTÉ] knob to select “UTILITY,” and
then press the [ENTER] (INIT) button.
3. Use the [ÇSELECTÉ] knob to select “BACKUP,” and
then press the [ENTER] (INIT) button.
The BACKUP screen appears.
4. Use the [ÇSELECTÉ] knob to move the cursor, and
use the [- VALUE +] knob to edit the characters.
5. Once you’ve entered the lename, press the [ENTER]
(INIT) button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
6. To execute, use the [- VALUE +] knob or the [Í] [Ë]
buttons to select “OK,” and then press the [ENTER]
(INIT) button.
When the backup is nished, the screen indicates “Completed!”
If a le of the same name exists, a conrmation screen
(Overwrite?) asks whether you want to overwrite the existing
le.
* Never turn o the power or disconnect the USB ash drive during a
process, such as while the “Executing…” display is shown.
Restoring Backup Data (RESTORE)
Here’s how user data that you backed up on a USB ash drive can be
returned to the JUNO-X. This operation is called “restore.”
NOTE
All user data are rewritten when you execute the restore operation. If your JUNO-X
contains important data, assign it a dierent name and back it up to a USB ash
drive before you restore.
1. Press the [MENU] (WRITE) button.
2. Use the [ÇSELECTÉ] knob to select “UTILITY,” and
then press the [ENTER] (INIT) button.
3. Use the [ÇSELECTÉ] knob to select “RESTORE,” and
then press the [ENTER] (INIT) button.
4. Use the [ÇSELECTÉ] knob to select the le to restore,
and then press the [ENTER] (INIT) button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
5. To execute, use the [- VALUE +] knob or the [
Í
] [Ë]
buttons to select “OK,” and then press the [ENTER]
(INIT) button.
When the restore operation is nished, the screen indicates
“Completed. Turn o power.”
6. Turn the power of the JUNO-X o and then on again.
* Never turn o the power or disconnect the USB ash drive during a
process, such as while the “Executing…” display is shown.