Roland JUNO-X - Page 55

55
Q&A
32 Can I prevent the I-Arpeggio TYPE and RHYTHM
from changing the sound or tempo?
Yes.
Proceed as follows.
1. Press the [MENU] (WRITE) button.
2. Select “SYSTEM,” and then press the [ENTER] (INIT)
button.
3. Use the [ÇSELECTÉ] knob to select the following
ARPEGGIO parameters, and use the [- VALUE +] knob
to turn each “OFF.”
Set Tone
Set Drumkit
Set Tempo
4. To save the edited settings, hold down the [SHIFT]
button and press the [MENU] (WRITE) button.
5. When the screen asks, “SYSTEM WRITE Are you sure?,”
press the [ENTER] (INIT) button.
The screen indicates “Now writing...,” and you return to the
SYSTEM setting screen.
33 Can the I-Arpeggio synchronize with the tempo
of an external sequencer?
Yes.
In SYSTEM settings, set the TEMPO/SYNC parameters as appropriate
for your situation.
Ø “Parameter Guide” (PDF)
34 Can I connect an external MIDI keyboard
and use it for keyboard performance with
I-Arpeggio?
Yes.
Make remote keyboard settings as follows.
1. Press the [MENU] (WRITE) button.
2. Select “SYSTEM,” and then press the [ENTER] (INIT)
button.
3. Use the [ÇSELECTÉ] knob to select “MIDI: Remote
K b d .”
4. Use the [- VALUE +] knob to select the connector/port
to which you connect your external MIDI keyboard.
You can select “MIDI IN,” “USB COM” or “USB MEM.”
5. To save the edited settings, hold down the [SHIFT]
button and press the [MENU] (WRITE) button.
6. When the screen asks, “SYSTEM WRITE Are you sure?,”
press the [ENTER] (INIT) button.
The screen indicates “Now writing...,” and you return to the
SYSTEM setting screen.