Roland RD-300NX

30
Performance
Changing the Tone for a Layer
31 2
3
1. Press the [LAYER EDIT] button to access the LAYER EDIT screen.
2. Use the Cursor [
] [ ] buttons to select the layer whose tone you want to change.
If a layer is switched o, its name is shown in lowercase characters.
3. Use the LIVE SET buttons to select the tone category, and then use the [DEC] [INC] buttons to
select a tone.
Adjusting the Volume Level for Individual Layers
With the RD-300NX, each of the parts that is performed using the internal sound generator is referred to as a Layer.
For each layer (UPPER 1, UPPER 2, LOWER), you can use the LAYER LEVEL Slider to adjust its volume.
LAYER
LEVEL
Sliders
LAYER LEVEL Slider
Adjusts the volume of an individual layer.
MEMO
Use the [VOLUME] slider when adjusting the overall volume level (p. 18).