Roland RD-300NX

32
Performance
Adding Reverberation to the Sound (REVERB)
The RD-300NX can apply a reverb eect to the notes you play on the keyboard.
Applying reverb adds pleasing reverberation to what you play, so it sounds almost as if you were playing in a concert hall.
2
21
1. Press the [REVERB] button, getting its indicator to light.
Reverb is turned on.
Reverb will alternately turn on/o each time you press the [REVERB] button.
MEMO
Types of reverb can be selected in “Reverb Type” (p. 66) of the “3. Eects” EDIT screen.
2. Hold down the [REVERB] button and use the [INC] [DEC] buttons to adjust the amount of reverb.
Pressing the [INC] button will deepen the reverb; pressing the [DEC] button will lessen the reverb.
You can adjust the reverb depth in a range of 0–127.
NOTE
If the layer setting (LAYER EDIT) “REV (Reverb Amount)” is at “0,” there will be no eect even if you adjust the reverb depth (p. 49).
Adding Breadth to the Sound (CHORUS/DELAY)
You can apply a chorus and delay eect to the notes you play on the keyboard.
By adding the chorus and delay eect, you can give the sound greater dimension, with more fatness and breadth.
2
21
1. Press the [CHORUS] button, getting its indicator to light.
Chorus is turned on.
Chorus will alternately turn on/o each time you press the [CHORUS] button.
MEMO
Types of chorus can be selected in “Chorus Type” (p. 66) of the “3. Eects” EDIT screen.
2. Hold down the [CHORUS] button and use the [INC] [DEC] buttons to adjust the amount of chorus.
Pressing the [INC] button will deepen the chorus; pressing the [DEC] button will lessen the chorus.
You can adjust the chorus depth in a range of 0–127.
NOTE
If the layer setting (LAYER EDIT) “CHO (Chorus Amount)” is at “0,” there will be no eect even if you adjust the chorus depth (p. 49).