Roland RD-300NX

50
Making Detailed Settings for Tones
Parameter Value Description
Sns (Velocity
Sense)
-63–+63
This setting determines how the volume changes in response to the velocity.
The volume is increased as the keyboard is played with greater force when a positive value is used; when a negative value is
selected, the volume decreases as the keys are played with greater force.
This setting is disregarded with certain tones.
Max (Velocity
Max)
1–127
Maximum velocity value for the corresponding key.
Lowering this value will produce softer notes even if you play the keyboard strongly.
This setting is disregarded with certain tones.
V.Reserve (Voice
Reserve)
0–64 Species the number of voices that will be reserved for each layer if you attempt to play more than 128 voices.
Dp
ON, OFF
Species whether the damper pedal will (ON) or will not (OFF) control each layer.
F1 Species whether the pedal connected to the FC1 jack will (ON) or will not (OFF) control each layer.
F2 Species whether the pedal connected to the FC2 jack will (ON) or will not (OFF) control each layer.
PB Species whether the pitch bend lever will (ON) or will not (OFF) control each layer.
Md Species whether the modulation lever will (ON) or will not (OFF) control each layer.
S1 Species whether the [S1] button will (ON) or will not (OFF) control each layer.
S2 Species whether the [S2] button will (ON) or will not (OFF) control each layer.