165
Appendices
Utility Screen: Settings for All Parts
fig.11-12
Button Operation Range of values (bold: default value)
PART [ ] [ ] ---
VAR. [ ] Moves the cursor down
INST [ ] Moves the cursor up
[EXIT] Enters the Part Basic screen
[ENTER] Executes various commands, such as when saving
the System Parameters, or when carrying out Bulk
Dump, Initialize, or Demo Play.
[EDIT] Enters the Edit screen
[DRUM] Enters the Drum screen
[EFFECTS] Enters the Effect screen
[SHIFT] ---
[SOLO] ---
[MUTE] Mutes all parts Off, On
[DEC] Lowers the value of the selected parameter by 1
[INC] Raises the value of the selected parameter by 1
[INST MAP] Forcibly changes the sound map of all parts No indication. (The Inst Map has not
been changed.), SC-8850, SC-88Pro,
SC-88, SC-55
[F1] SYSTEM Sets SYSTEM parameters (PrevwMode, Prevw Note,
Prevw Velo, LCD Contrast, Startup) (Pressing [EN-
TER] after setting the parameter saves the system pa-
rameter settings.)
[F2] BULK Sets BULK parameters (Dump All, Dump All-User,
Dump User Inst, Dump User Drum, Dump Part-A,
Dump Part-B, Dump Part-C, Dump Part-D) (use
[INC] [DEC] or [VALUE] to select the parameter, and
press [ENTER] to execute or [EXIT] to cancel)
[F3] INIT Sets INITIALIZE parameters (Initialize All, Initialize
GS, Initialize GM1, Initialize GM2) (use [INC] [DEC]
or [VALUE] to select the parameter, and press [EN-
TER] to execute or [EXIT] to cancel)
[F4] DEMO Selects the DEMO song (THE SECRET PLACE,
WALL FIVE MIX, Blue X, All Song) (use [INC] [DEC]
or [VALUE] to select the parameter, and press [EN-
TER] to execute or [EXIT] to cancel. Press [EXIT] or
[STOP] ([F1]) to Stop the play.)
SC
-
55
SC
-
88
SC
-
88Pro
PART INSTVAR.
MAP
F1
F2
F3
F4
INST
SC
-
8850
To Next Page
Loading...
