Roland SP-404MK - Turning the Unit Power On;Off

Introduction > GettingThingsReady
TurningthePowerOn/Off
Beforeturningtheuniton/off,alwaysbesuretoturnthevolumedown.Evenwiththevolumeturneddown,youmight
hearsomesoundwhenswitchingtheuniton/off.However,thisisnormalanddoesnotindicateamalfunction.
Turningthepoweron
TurningthePowerOff
Toturnonthepower,slidethe[POWER]switchofthisunitto“ON.”
1
Next,turnonanyconnecteddevices,andthentheamp/speakers,inthatorder.
2
Adjuststhevolumeoftheconnectedinstrument.
3
Adjustthevolumeofthisunitwiththe[VOLUME]knob.
4
Turnthevolumeofthisunitandofyourampandspeakersallthewaydown.
1
Turnoffthepowerofyourampandspeakers.
2
Slidethe[POWER]switchofthisunitto“OFF”toturnoffthisunit.
3