Roland SP-404MK - Error Messages

Appendix
ErrorMessages
Error
messages
Explanation Action
BatteryLow! Thebatteriesarenearlydepleted. Replacethebatteries,orswitchtoanACadaptor.
→“AboutthePowerSupply”
Unsupported
FILE
Thefiletypeisnotsupportedonthisunit. Checkthefileextension,formatandfolderdirectory.
→“Importing/Exporting(UsingtheSDCard)”
NoSD
CARD!
NoSDcardisinserted.Also,theSDcard
mightnotbefullyinserted.
Turnoffthepower,andmakesurethattheSDcard
isfullyinsertedbeforeyouturnthepowerbackon.
Unsupported
SDCard!
AnunsupportedtypeofSDcardhas
beeninserted.
PleaseformattheSDcard.
→“FormattinganSDCard”
SDCARD
Protected!
Thewrite-protectfeaturehasbeen
enabledontheSDcard.
UnlockthelockswitchontheleftsideoftheSD
card.
SDCARD
Full!
TheSDcardhasrunoutoffreespace. Deleteanyunneededdataonthecard.
Internal
StorageFull!
Thereisnotenoughstoragecapacityleft
onthisunit.
Deleteanyunneededdataontheunit.
Storage
Error!
Aproblemhasoccurredwiththeinternal
storage.
Tryperformingafactoryreset.
→“RestoringtheFactorySettings(FACTORY
RESET)”
Protected! Thefunctioncanʼtbeexecutedbecause
bankprotectisenabled.
Useabankforwhichbankprotectisdisabled,or
disablebankprotectonthecurrentlyselectedbank.
→“SelectingaSampleBank”“SelectingaPattern
Bank”“ProtectingaSample(PROTECT)”“Protecting
aPattern(PROTECT)”
MaxLength
Pattern
Themaximumnumberofnotesthatcan
berecordedtothepatternsequencer
hasbeenexceeded.
Reducethenumberofnotesinthepattern,or
shortenandsplitthepatterntorecord.
→“CreatingaNewPattern”