Roland SP-404MK - Super Filter

Appendix > MFXList
SuperFilter
Thisisafilterwithanextremelysharpslope(attenuationcharacteristics).Thecutofffrequencycanbevariedcyclically.
Parameter Value Explanation
CUTOFF 0‒
100
Setsthefrequencyrangeinwhichthefilterworks(thecutofffrequency).Highervalues
increasethefrequencyrange.
RESONANCE 0‒
100
Adjuststhefilterʼsresonancelevel.
Thelargerthevalue,themorethatthefrequencyrangesetinCUTOFFisemphasized.
FLTTYPE Setsthefiltertype.
LPF Alow-passfilter.Thisfilterletsfrequenciespassthroughthatarehigherthanthe
frequencyrangesetinCUTOFF.
BPF Aband-passfilter.Thisfilterletsfrequenciespassthroughthatarenearthefrequency
rangesetinCUTOFF.
HPF Ahigh-passfilter.Thisfilterletsfrequenciespassthroughthatarehigherthanthe
frequencyrangesetinCUTOFF.
DEPTH 0‒
100
Setsthedepthoftheeffect.
RATE 0‒
100
Setsthecycle(period)oftheeffect.
SYNC OFF,
ON
WhenthisisON,theeffectsoundsynchronizeswiththetempo.