Roland SP-404MK - MUTE BUS Function

UsingtheEffects
TemporarilyOutputOnlytheEffectSound(MUTEBUS)
Youcantemporarilymutetheaudio(thesampleplaybacksoundortheaudiocomingintotheINPUTjack)thatʼssentto
abus,andoutputonlythesoundoftheeffect.
Thisletsyououtputjustthesoundofreverberationordelayfeedbacktocreateabreakwhenyouʼreplaying.
HowMUTEBUSworks
TheMUTEBUSfeatureworksinacomplexwaytocontroltheaudiosenttothebusesandtheeffectsatthesametime.
ThisshowstheaudiosignalflowwhenusingMUTEBUS.
Also,thediagrambelowshowshowtheaudiooutputtedfromthisunitchangeswhenyouturnMUTEBUSon/off.
Playbackasample.
1
Holddownthe[SHIFT]buttonandpressthe[BUSFX]button.
MUTEBUSturnson.Thisshutsofftheaudiosignalsenttothebus.
2
ToturnMUTEBUSoff,holddownthe[SHIFT]buttonandpressthe[BUSFX]buttonagain.
MUTEBUSturnsoff.Thisallowstheaudiosignaltobesenttothebus.Atthesametime,theeffects
assignedtothebusturnoff.
3