Roland SP-404MK - Initializing Sample Parameters

EditingaSample(SAMPLEEDIT)
InitializingtheSampleParameters(INITPARAM)
Thisrestorestheparameterssetinasample(suchasthestartpoint,endpoint,tempoandsoon)totheirdefault
values.
Holddownthe[SHIFT]buttonandpressthepad[6].
Aconfirmationmessageappears.
Ifyoudecidetocancel,pressthe[EXIT]button.
1
Usethe[VALUE]knobtoselect“OK,”andpressthe[VALUE]knob.
Theparametersarenowinitialized.
2