Roland SP-404MK - Copying Patterns

EditingaPattern(PATTERNEDIT) > OrganizingthePatternData
CopyingthePatternofaPad
Hereʼshowtocopythepatternthatʼsassignedtoapadtoadifferentpad.
Youcanʼtperformthefollowingoperationswhileapatternisplayingback.Stopthepatternbeforeperformingthe
operation.
Copyingallpatternsinabanktoanotherbank
Thisishowtocopyallthepatternsinabanktoanotherbank.
Pressthe[COPY]button.
TheCOPYscreenappears.
1
Pressthepadsinorder,beginningwiththepattern(pad)youwanttocopy,andthenthecopy
destinationpattern(pad).
Ifyoudecidetocancelcopying,pressthe[EXIT]button.
Youcanusethebank[A/F]‒[E/J]buttonstoselectabankbeforepressingthepads.Itʼsalsopossibleto
copypatternsbetweendifferentbanks.
2
Pressthe[VALUE]knobor[COPY]button.
Thepatternforthatpadiscopied.
Performingthisoperationoverwrites(erases)thepatterninthecopydestinationpad.
3
Holddownthe[COPY]buttonandpressthe[EXIT]button.
1