29
2.Installation
1. Assembly and Ink Filling
G
Lightly ghten the bolts in the order of
1
,
2
.
Tighten
temporarily
Bolts (short): 6
H
Fully ghten the bolts in the order of
1
,
2
.
Before ghtening the bolts, check once more that the 2 stand legs are parallel. If the inside of
the stand stay is touching the L-shaped brackets and the stand legs, the stand legs will be paral-
lel.
Tighten the bolts securely. Loose bolts may cause the stand to wobble.
Tighten fully
Bolts (short): 6
To Next Page
Loading...
