Roland TrueVIS VG2-540 - Page 33

31
2.Installation
1. Assembly and Ink Filling
B
Aach the liing bars to the temporarily ghtened liing bar xing bolts.
Aer passing the liing bar xing bolts through the holes, slide the liing bars to the front so
that they do not fall o.
C
Fully ghten the liing bar xing bolts (4 locaons in total).
Tighten the liing bar xing bolts securely. Loose liing bar xing bolts may lead to accidents
when the printer unit is moved.
Tighten fully
Liing bar xing
bolts: 4
Point
You can view the inside of the liing bars from the top holes. Carry out the work while checking the
posions and ghtening status of the bolts.