Roland TrueVIS VG2-540 - Page 35

33
2.Installation
1. Assembly and Ink Filling
C
Fully ghten the bolts (long) in the order of
1
,
2
.
Tighten the bolts (long) securely. Loose bolts (long) may cause the stand to wobble.
Tighten fully
Bolts (long): 8
Washers: 8
D
Remove the liing bars.
1
Loosen the liing bar xing bolts (4 locaons in total) on the boom surface of the
printer unit.
2
Remove the liing bars by sliding them to the back of the printer unit.