Roland VersaCamm SP-300V User Manual

Chapter 1 Introduction
18
1-1 Machine Features
The machine is the "Print & Cut" machine that combines the two functions of high-quality printing and outline cutting
in a single unit. This makes possible not only use as either a printer or a cutting machine, but also enables versatile
uses such as performing printing followed immediately by cutting, without having to first remove the media from the
machine.
The machine is provided with a crop-mark feature. This makes possible accurate alignment when you want to remove
the media after printing, perform lamination or other processing, then load the media again to perform cutting.
Also, a print heater and a dryer are built in. These help to fix and dry the ink, thereby enhancing work efficiency. The
temperature setting for each can be preset to match the ambient environment and the media used.
With these features, the machine can accommodate a wide variety of uses, ranging from the creation of stickers and
cut-out text and small-lot label printing to the production of panels, outdoor signs, and more.

Roland VersaCamm SP-300V Specifications

General

Resolution	Up to 1440 dpi
Connectivity	USB
Print Technology	Piezoelectric Inkjet
Media Handling	Roll-fed
Ink Colors	Cyan, Magenta, Yellow, Black
Media Thickness	Max. 1.0 mm (39 mil) with liner
Media Types	Vinyl, banner, paper, film
Power Requirements	AC 100 to 120 V ±10 %, 50/60 Hz
Operating Environment	Temperature: 20-32°C, Humidity: 35-80% (non-condensing)