Roland VersaCamm SP-300V User Manual

24
Chapter 2 Operation
2-1 Switching the Power On and Off
Switching the Power On and Off
This machine has a main power switch and a sub power switch. Switch on both to use the machine.
Whenever printing or cutting is finished, switch off the sub power. Also, raise the loading lever.
Important Note on Switching Off the Power
Never switch off the main power or unplug the power cord suddenly while operation is in progress. Doing so may
damage the print heads. Be sure to first switch off the sub power.
If the main power is accidental switched off, immediately turn the power back on.
➀ Main power switch
Turn this switch on after
closing the front cover. To
turn it off, hold down the
switch for one second or
longer.
➁ Sub power switch
Keep this lever raised when the machine is not in use.

Roland VersaCamm SP-300V Specifications

General

Resolution	Up to 1440 dpi
Connectivity	USB
Print Technology	Piezoelectric Inkjet
Media Handling	Roll-fed
Ink Colors	Cyan, Magenta, Yellow, Black
Media Thickness	Max. 1.0 mm (39 mil) with liner
Media Types	Vinyl, banner, paper, film
Power Requirements	AC 100 to 120 V ±10 %, 50/60 Hz
Operating Environment	Temperature: 20-32°C, Humidity: 35-80% (non-condensing)